Ricoh Pentax 645Z, Operating Manual

Page: 20 / 172

18
1
You can change the type of information displayed in standby
mode by pressing G while the control panel is displayed.
Use CD to select the type and press E .
?
?
Displays the settings for shooting with the viewfinder. (p.16)
Displays the camera angle.
A bar scale indicating the
camera angle in the horizontal
direction appears at the bottom
of the screen, and a bar scale
indicating the camera angle in
the vertical direction appears on
the right side. If the camera
angle cannot be detected, both
ends and the center of the bar
scales flash red.
Disappears if no operations are made within 1 minute.
Nothing is displayed on the monitor.
The current latitude, longitude, altitude, direction, and
Coordinated Universal Time (UTC) are displayed. Turn the
camera off and on again to return to the status screen.
Available only when the optional GPS unit is attached to the
camera and is operating. (p.96)
The Live View image and the settings for
shooting with Live View are displayed. (p.16)
Certain icons, such as those for the Exposure
Mode and Drive Mode, are not displayed.
Example:
Tilted 1.5° to the left (yellow)
No vertical tilt (green)
When the camera is held vertically, the status
screen and control panel are displayed in the
vertical position. To not display images in the
vertical position, set [Auto Screen Rotation] to
off in [LCD Display] of the
D
1 menu.
(
w
p.R30)
1234 1234
1234 1234
1/ 1/
F F
2 5 0 2 5 0
1 6 0 0 1 6 0 0
5.6 5.6