Ricoh Pentax 645Z, Operating Manual

Page: 140 / 172

R26
B
B
Select the memory card in either the
SD1 or SD2 slot, and set how to display
images during slideshow. Select [Start]
to start slideshow playback.
Press c ( d ) to switch between the memory cards inserted
in the two slots, SD1 and SD2.
Refer to the Operating Manual for details on operations during
slideshow playback. (
w
p.76)
Sets the initial magnification when magnifying images
(
w
p.73). Select from
z
(actual pixel size), [×16], [×8], [×4],
[×2], and [Off].
You can display the grid in [Standard Information Display]
or [No Information Display] in playback mode. Select from
the following grid styles and colors.
The grid cannot be displayed while viewing a movie, displaying
a magnified image, or vertically displaying an image with its size
reduced.
Bright (overexposed) portions blink red in Standard Information
Display, Histogram Display, or No Information Display
in playback mode.
Images are rotated and displayed according to the orientation
of the camera when playing back images captured with
the camera held vertically or images for which the rotation
information has been changed.
You can select the memory card in the SD1 or SD2 slot and
protect all saved images at once. Select [Unprotect] to remove
protection from all images.
B
1
Sets an image display interval. 3sec., 5sec., 10sec.,
30sec.
Sets a transition effect when the
next image is displayed
Fade, Wipe, Stripe, OFF
Sets whether the slideshow will
start again from the beginning
after the last image is displayed.
S
,
T
Plays back movies during the
slideshow.
T
,
S
B
1
Display Duration Display Duration
Screen Effect Screen Effect
Repeat Playback Repeat Playback
Auto Movie Playback Auto Movie Playback
3sec. 3sec.
OK OK
Start Start
100-0001 100-0001
B
1
4×4, Golden Section, Scale, Square 1, Square 2, OFF
Translucent black color, translucent white color
B
1
B
1
B
1