Ricoh Pentax 645Z, User Manual

Page: 64 / 172

62
Sho
oti
ng F
un
ction
s
3
You can use Exposure Bracketing to take 2 (standard exposure
and underexposure, or standard exposure and overexposure),
3 or 5 images with different exposure levels.
This function can be used with Continuous Shooting, Self-timer,
or Remote Control set by pressing
A
.
1
Turn
Q
while pressing
5
to set the number of shots.
Check the setting on the LCD panel.
Right (clockwise) OFF → 3 → 5 → 2 → -2 → OFF
Left (counterclockwise) OFF → -2 → 2 → 5 → 3 → OFF
2
Turn
R
while pressing
5
to set the bracket value.
Press
M
while pressing
5
to return to [OFF] and [--].
3
Press the shutter release button fully.
Select [OFF] in Step 1 to finish shooting with Exposure Bracketing.
Memo
• Set the auto bracketing order with [8. Bracketing Order] in the
E
2
menu. (
w
p.R40)
• Set the EV step interval with [1. EV Steps] in the
E
1 menu.
(
w
p.R39)
• Set [9. One-Push Bracketing] in the
E
2 menu to shoot all frames
with one press of the shutter release button. (
w
p.R40)
• If you take your finger off the shutter release button before shooting
of the set number of images is completed, the next bracket setting
will remain effective for twice the amount of the exposure metering
time.
• You can combine Exposure Bracketing with the P-TTL auto flash
to change the flash output continuously. Confirm that the flash unit
is fully charged before shooting each frame.
Caution
• This function is not available in
M
mode.
• This function cannot be used with Multi-exposure, Interval
Shooting, or Interval Composite. The function set last is used.
Exposure Bracketing
5
EV Steps Compensation Value
1/3 EV ±0.3, ±0.7, ±1.0, ±1.3, ±1.7, ±2.0
1/2 EV ±0.5, ±1.0, ±1.5, ±2.0
5 images at 1.0 EV 2 images (underexposed) at 0.3 EV
e_kb547_ENG.book Page 62 Thursday, May 15, 2014 9:35 AM