Ricoh Pentax 645Z, User Manual

Page: 56 / 172

54
Sho
oti
ng F
un
ction
s
3
5
Press
E
.
The camera returns to standby mode.
Memo
• The settings for the white balance can be set in the
E
2 menu.
(
w
p.R40)
You can save up to three manual white balance settings.
1
Select
o
in Step 2 on p.53 and press
B
.
2
Select from
o
1 to
o
3.
3
Under the light you wish to measure the white
balance of, select a white area as the subject,
and press the shutter release button fully.
The captured image is displayed.
[The operation could not be completed correctly] appears when
measuring is unsuccessful. Press
E
to remeasure the white
balance.
4
Use
ABCD
to specify the measuring range.
5
Press
E
.
The White Balance setting screen reappears.
You can copy the white balance settings of an image captured
with this camera and save them as Manual White Balance.
1
In single image display of the playback mode, display
the image with the white balance settings you want to
copy and then press
B
.
The playback mode palette appears.
2
Select
o
(Save as Manual WB) and press
E
.
The save confirmation screen appears.
3
Select the “Manual” number 1,
2 or 3 to save the settings.
Use
Q
to select a different image.
4
Press
E
.
The white balance settings of the selected image is saved as
Manual White Balance and the camera switches to standby mode.
Caution
• The fine-tuned white balance value used when shooting is not
saved.
Manual White Balance
Manual White Balance Manual White Balance
Cancel Cancel
Adjust Adjust
WB± WB±
OK OK
Check Check
Saving the White Balance Settings
of a Captured Image
Cancel Cancel OK OK
Save as Manual 1 Save as Manual 1
Save as Manual 2
Save as Manual 2
Save as Manual 3
Save as Manual 3
Saves this image's White Balance Saves this image's White Balance
settings as a custom selection settings as a custom selection
100-0001 100-0001
e_kb547_ENG.book Page 54 Thursday, May 15, 2014 9:35 AM