Ricoh Pentax 645Z, User Manual

Page: 20 / 172

18
Be
fo
re Usi
ng
Your C
amera
1
You can change the type of information displayed in standby
mode by pressing
G
while the control panel is displayed.
Use
CD
to select the type and press
E
.
When shooting with the viewfinder
When shooting with Live View
Shooting Info Display
Status
Screen
Displays the settings for shooting with the viewfinder. (p.16)
Electronic
Level
Displays the camera angle.
A bar scale indicating the
camera angle in the horizontal
direction appears at the bottom
of the screen, and a bar scale
indicating the camera angle in
the vertical direction appears on
the right side. If the camera
angle cannot be detected, both
ends and the center of the bar
scales flash red.
Disappears if no operations are made within 1 minute.
Display Off Nothing is displayed on the monitor.
Electronic
Compass
The current latitude, longitude, altitude, direction, and
Coordinated Universal Time (UTC) are displayed. Turn the
camera off and on again to return to the status screen.
Available only when the optional GPS unit is attached to the
camera and is operating. (p.96)
Standard Information
Display
The Live View image and the settings for
shooting with Live View are displayed. (p.16)
No Information Display Certain icons, such as those for the Exposure
Mode and Drive Mode, are not displayed.
Example:
Tilted 1.5° to the left (yellow)
No vertical tilt (green)
Vertical Display
When the camera is held vertically, the status
screen and control panel are displayed in the
vertical position. To not display images in the
vertical position, set [Auto Screen Rotation] to
off in [LCD Display] of the
D
1 menu.
(
w
p.R30)
1234 1234
1234 1234
1/ 1/
FF
2 5 0 2 5 0
1 6 0 0 1 6 0 0
5.6 5.6
e_kb547_ENG.book Page 18 Thursday, May 15, 2014 9:35 AM