17
Check that “Ready” is displayed on the screen.
If any other function is displayed, press the
{
Facsimile
}
key on the left of the control panel.
Check that the Memor y Trans.
indicator is not lit.
If it is lit, Memory Transmission mode is selected. In this
case, press the
{
Memory Trans.
}
key.
Load originals in the ADF/ARDF.
Specify the scan settings according to your original.
⋅
Type of Original: Text or Photo
⋅
Resolution: Standard, Detailed, or Fine
⋅
Image Density (Contrast): Manual Image Density (five levels)
Using the number keys or a Quick
Dial key, specify the destination.
If you make a mistake, press the
{
Clear/Stop
}
key, and
then re-enter the destination number.
Press the
{
{
{
{
{
Start
}
}
}
}
}
key.
⋅
To fax multiple-page originals from the exposure glass: after the
first page is scanned, place the next original on the glass and
press the
{
Start
}
key within 10 seconds. You can also change
the scan settings (as in step 4).
⋅
After placing the last original on the glass, press the
{
q
}
key.
⋅
For details about searching for a destination, see “Searching for a Destination in the Address Book”, Fac-
simile Reference on the supplied CD-ROM.
⋅
For details about the scan settings, see “Scan Settings”, Facsimile Reference on the supplied CD-ROM.
⋅
To specify a destination using a Quick Dial key, see “Using the Quick Dial Keys”, Facsimile Reference on
the supplied CD-ROM.
3 Using the Basic Copier and Fax Functions
Sending a Fax (Immediate Transmission)
BDZ013S