Ricoh MP 2001SP Page 52 User Manual Download

Page: 52 / 228

seconds or more before, and then turn it on again. Never turn the power back on immediately after
turning it off.

• Before unplugging the power cord plug, turn off the main power switch and make sure the main

power switch indicator turns off. Not doing so may result in damage to the hard disk or memory,
leading to malfunctions.

• Do not turn off the power while the machine is in operation. Doing so may result in damage to the

hard disk or memory, leading to malfunctions.

• Do not hold down the main power switch while turning off the main power. Doing so forcibly turns

off the machine's power and may damage the hard disk or memory and cause malfunctions.

Push the main power switch.

The main power indicator goes out.

2. Getting Started

Summary of Contents for MP 2001SP





































































































































































































































Search results

Summary of Contents for MP 2001SP

Reviews:

Related manuals for MP 2001SP

Brands by name

Popular brands

Ricoh MP 2001SP, User Manual

Search results

Summary of Contents for MP 2001SP

Reviews:

Related manuals for MP 2001SP

Brands by name

Popular brands