Ricoh MP 2001SP, User Manual

Page: 129 / 228

9. Adding Paper and Toner
This chapter describes how to load paper into the paper tray and recommended paper sizes and types.
Loading Paper into Paper Trays
Every paper tray is loaded in the same way.
In the following example procedure, paper is loaded into Tray 1.
• If a paper tray is pushed vigorously when putting it back into place, the position of the tray's side
fences may slip out of place.
• Check the paper edges are aligned at the right side.
• When loading a low number of sheets, be sure not to squeeze the side fences in too tightly. If the
side fences are squeezed too tightly against the paper, the edges may crease or the paper may
misfeed.
1. Check that paper in the paper tray is not being used, and then pull the tray carefully out
until it stops.
CSN007
2. While pinching the release lever of the end fence, slide the end fence outward.
CSN008
127