Ricoh MIB-II Operating Instructions Manual Download Page 213

Page: 213 / 257

Operating Instructions

Administrator Reference

213

Print Log Information

This is a record of the most recent 16 jobs that have been printed.

This log can be displayed with the following commands.

•

telnet : Use the prnlog command. See

p.190 “Printer status”

Appears the UserID and JobName information when entering the info command with the ID.

Name

Meaning

Print request ID.

User

Print request user name.

Page

The number of pages that is printed.

Result

The result of the print request.

Time

The time when the print request was received

User ID

User ID that is to be configured in the printer driver.

JobName

The name of the document for printing.

Summary of Contents for MIB-II

































































































































































































































































Search results

Summary of Contents for MIB-II

Reviews:

Related manuals for MIB-II

Brands by name

Popular brands

Ricoh MIB-II, Operating Instructions Manual

Search results

Summary of Contents for MIB-II

Reviews:

Related manuals for MIB-II

Brands by name

Popular brands