Ricoh MIB-II Operating Instructions Manual Download

Page: 190 / 257

Operating Instructions

Administrator Reference

190

Printer status

The following commands can be used to get information about the current status of the printer.

msh> command

Note

❒

More information about any print job is displayed when the ID number is added after the prnlog com-
mand.

Reference

For more information about the meaning of the data returned with these commands, see

p.212 “Un-

derstanding the Displayed Information”

Network Interface Board configuration settings information

Use the show command to display the Network Interface Board configuration settings.

msh> show [-p]

Note

❒

Add "-p" to the show command to have information displayed on screen at one time.

Command

Information that is displayed

status

Status of printer.

Information about the print jobs.

info

Information about the paper tray, output tray, and
printer language.

prnlog [ID]

Lists the last 16 print jobs.

Summary of Contents for MIB-II

































































































































































































































































Search results

Summary of Contents for MIB-II

Reviews:

Related manuals for MIB-II

Brands by name

Popular brands

Ricoh MIB-II, Operating Instructions Manual

Search results

Summary of Contents for MIB-II

Reviews:

Related manuals for MIB-II

Brands by name

Popular brands