10 October, 2002
COOLING FAN
3-17
R
eplacement
Ad
ju
st
m
en
t
3. Remove three screws securing the
Motor Ass’y, then remove the
Motor Ass’y.
NOTE:
When reassembling the Motor
Ass’y, make sure that the
boss (shown in the figure) fits
into the corresponding screw
holes on the Motor Ass’y. This
will allow the screws to be
fastened properly.
3.23 COOLING FAN
1. Before removing the fan, you should remove:
– OPE cover (
☛
3.2)
– Rear cover (
☛
3.12)
– Top cover (
☛
3.13)
– Main Motor Ass’y (
☛
3.22)
2. Unplug the single connector from the
engine board and remove the fan.
H911R941.WMF
H911R942.WMF
