10 October, 2002
HVPS BOARD (ALSO KNOWN AS POWER PACKER)
3-19
R
eplacement
Ad
ju
st
m
en
t
3.26 HVPS BOARD
(ALSO KNOWN AS POWER PACKER)
1. Before removing the HVPS board, you should remove:
– OPE cover (
☛
3.2)
– Rear cover (
☛
3.12)
– Top cover (
☛
3.13)
2. Remove four screws and single
connector from the HVPS board, and
then remove the board.
NOTE:
When reassembling, make sure
that all five springs to be used as
connection terminals are set
properly.
3.27 HOOK BOARD
1. Before removing the hook board, you should remove:
– OPE cover (
☛
3.2)
– Rear cover (
☛
3.12)
– Top cover (
☛
3.13)
2. Unplug the single connector from the
main board and remove both screws.
3. Remove the hook board from the main
frame.
H911R946.WMF
H911R947.WMF
