FUSING UNIT ASS’Y
10 October, 2002
3-20
3.28 FUSING UNIT ASS’Y
!
CAUTION
The fusing unit is assembled with tapping screws. Assembly/disassembly
should be kept to a minimum. Repeated adjustments may cause failure. To
avoid hazardous situations, do not replace any components inside the
fusing unit such as thermistor, hot roller, stripper pawls, fusing lamp, etc..
1. Before removing the Fusing Unit Ass’y, you should remove:
– OPE cover (
☛
3.2)
– Rear cover (
☛
3.12)
– Top cover (
☛
3.13)
2. Remove both wires after you have
removed both screws from the main
frame, and the single connector from
the inter connector.
3. Remove both screws and unlatch the
Fusing Unit Ass’y using a suitable tool.
H911R948.WMF
H911R949.WMF
