Ricoh LD425c Page 296 General Settings Manual Download | Manualshive

Page: 296 / 317

background image

Information about Installed Software

287

9

2.Authors Name List
All product names mentioned herein are trademarks of their respective owners.
The following notices are required to satisfy the license terms of the software
that we have mentioned in this document:
• This product includes software developed by the University of California,

Berkeley and its contributors.

• This product includes software developed by Jonathan R. Stone for the NetB-

SD Project.

• This product includes software developed by the NetBSD Foundation, Inc.

and its contributors.

• This product includes software developed by Manuel Bouyer.
• This product includes software developed by Charles Hannum.
• This product includes software developed by Charles M. Hannum.
• This product includes software developed by Christopher G. Demetriou.
• This product includes software developed by TooLs GmbH.
• This product includes software developed by Terrence R. Lambert.
• This product includes software developed by Adam Glass and Charles Han-

num.

• This product includes software developed by Theo de Raadt.
• This product includes software developed by Jonathan Stone and Jason R.

Thorpe for the NetBSD Project.

• This product includes software developed by the University of California,

Lawrence Berkeley Laboratory and its contributors.

• This product includes software developed by Christos Zoulas.
• This product includes software developed by Christopher G. Demetriou for

the NetBSD Project.

• This product includes software developed by Paul Kranenburg.
• This product includes software developed by Adam Glass.
• This product includes software developed by Jonathan Stone.
• This product includes software developed by Jonathan Stone for the NetBSD

Project.

• This product includes software developed by Winning Strategies, Inc.
• This product includes software developed by Frank van der Linden for the

NetBSD Project.

• This product includes software developed for the NetBSD Project by Frank

van der Linden

• This product includes software developed for the NetBSD Project by Jason R.

Thorpe.

• The software was developed by the University of California, Berkeley.
• This product includes software developed by Chris Provenzano, the Univer-

sity of California, Berkeley, and contributors.

«
...
294
295
296
297
298
...
»

Summary of Contents for LD425c






























































































































































































































































































































Reviews:

No comments

Related manuals for LD425c

Pixma MG2400 Series

Brand: Canon Pages: 2

Brand: Canon Pages: 11

Brand: Canon Pages: 2

Brand: Canon Pages: 12

PIXMA Pro9000 Mark II Series

Brand: Canon Pages: 4

Brand: Samsung Pages: 322

Brand: Samsung Pages: 340

Brand: Samsung Pages: 349

Brand: Samsung Pages: 330

Brand: Samsung Pages: 315

Brand: Samsung Pages: 2

Brand: Samsung Pages: 2

Brand: Samsung Pages: 232

Brand: Samsung Pages: 42

SCX-6545N Series

Brand: Samsung Pages: 468

Brand: Samsung Pages: 196

SCX4521F - B/W Laser - All-in-One

Brand: Samsung Pages: 120

Brand: Xerox Pages: 168

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands