Connecting the Machine
20
1
Note
❒
In
[
Effective Protocol
]
, check that the protocol you want to use is set to
[
Active
]
.
❒
[
IEEE 802.11b
]
and
[
LAN Type
]
are displayed when the wireless LAN interface
board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con-
nected, the selected interface takes precedence.
❒
[
SMTP Server
]
and
[
Fax E-mail Account
]
must be specified in order to use the
send function.
❒
When
[
POP before SMTP
]
is set to
[
On
]
, also make setting for
[
Reception Protocol
]
and
[
POP3 / IMAP4 Settings
]
.
❒
When
[
SMTP Authentication
]
is set to
[
On
]
, also make setting for
[
Administrator's
E-mail Address
]
.
❒
[
E-mail Communication Port
]
and
[
Fax E-mail Account
]
must be specified in order
to use the reception function.
❒
When setting
[
POP before SMTP
]
to
[
On
]
, check
[
POP3
]
port number in
[
Communication Port
]
.
Reference
p.58 “Interface Settings”
p.68 “File Transfer”
Settings Required to Use E-mail Function
This section lists the settings required for sending e-mail.
Ethernet
This section lists the settings required for sending e-mail with Ethernet cable.
For details about how to specify the settings, see “Interface Settings” and “File
Transfer”.
Menu
User Tool
Setting Requirements
Interface Settings/Network Machine IPv4 Address
Neccessary
Interface Settings/Network IPv4 Gateway Address
Neccessary
Interface Settings/Network DNS Configuration
As required
Interface Settings/Network DDNS Configuration
As required
Interface Settings/Network Domain Name
As required
Interface Settings/Network WINS Configuration
As required
Interface Settings/Network Effective Protocol
Neccessary
Interface Settings/Network Ethernet Speed
As required
Interface Settings/Network LAN Type
Neccessary
Interface Settings/Network Permit SNMPv3 Communication
As required
