manualshive.com logo in svg

Ricoh LD425, General Settings Manual, Page: 284 / 324

Share
Download
Ricoh LD425 General Settings Manual Download Page 284

8.

Press [OK].

9.

Press [Exit].

10.

Press the [User Tools/Counter] key.

Displaying Names Registered in a Group

This section describes how to display names registered in a group.
You can check the names or groups registered in each group.

1.

Press [System Settings].

2.

Press [Administrator Tools].

3.

Press [Address Book: Program / Change / Delete Group].

4.

Check that [Program / Change] is selected.

5.

Select the group where the members you want to check is registered.

If you press [Search], you can search by the registered name, fax number, folder name, e-mail
address, or IP-Fax destination.

6.

Press [Programmed User/Group].

All the names registered will be displayed.

7.

Press [OK].

8.

Press [Exit].

7. Registering Addresses and Users for Facsimile/Scanner Functions

282

7

Summary of Contents for LD425





































































































































































































































































































































Reviews:

No comments