manualshive.com logo in svg

Ricoh LD425, General Settings Manual, Page: 267 / 324

Share
Download
Ricoh LD425 General Settings Manual Download Page 267

• To change the name, key display and title, see "Changing a Registered Name".

• p.228  "Changing a Registered Name"
• p.262  "Locating the SMB folder manually"
• p.263  "Locating the SMB folder using Browse Network"

To change the protocol

This section describes how to change the protocol.

1.

Press [FTP] or [NCP].

A confirmation message appears.

2.

Press [Yes].

Changing the protocol will clear all settings made under the previous protocol.

3.

Enter each item again.

• p.266  "Using FTP to Connect"
• p.271  "Using NCP to Connect"

Deleting an SMB registered folder

This section describes how to delete the registered SMB folder.

Registering Folders

265

7

Summary of Contents for LD425





































































































































































































































































































































Reviews:

No comments