manualshive.com logo in svg

Ricoh LD425, General Settings Manual, Page: 272 / 324

Share
Download
Ricoh LD425 General Settings Manual Download Page 272

Changing the protocol

This section describes how to change the protocol.

1.

Press [SMB] or [NCP].

A confirmation message appears.

2.

Press [Yes].

Changing the protocol will clear all settings made under the previous protocol.

3.

Enter each item again.

• p.260  "Using SMB to Connect"
• p.271  "Using NCP to Connect"

Changing the registered FTP folder

This section describes how to change the registered FTP folder.

1.

Press [Change] under "Port Number".

2.

Enter the new port number, and then press the [ ] key.

3.

Press [Change] under "Server Name".

4.

Enter the new server name, and then press [OK].

5.

Press [Change] under "Path".

6.

Enter the new path, and then press [OK].

Deleting an FTP Folder

This section describes how to delete the registered FTP folder.

7. Registering Addresses and Users for Facsimile/Scanner Functions

270

7

Summary of Contents for LD425





































































































































































































































































































































Reviews:

No comments