manualshive.com logo in svg

Ricoh LD425, General Settings Manual, Page: 268 / 324

Share
Download
Ricoh LD425 General Settings Manual Download Page 268

1.

Press [System Settings].

2.

Press [Administrator Tools].

3.

Press [Address Book Management].

4.

Check that [Program / Change] is selected.

5.

Select the name whose folder you want to delete.

Press the name key, or enter the registered number using the number keys.
You can search by the registered name, fax number, folder name, e-mail address, or IP-Fax
destination.

6.

Press [Folder].

7.

Press the protocol which is not currently selected.

A confirmation message appears.

8.

Press [Yes].

9.

Press [OK].

10.

Press [Exit].

11.

Press the [User Tools/Counter] key.

• To delete the name, key display, and title, see "Deleting a Registered Name".

• p.229  "Deleting a Registered Name"

Using FTP to Connect

This section describes the procedure for registering, changing, and deleting FTP folders.

• To register a shared folder configured in Windows, see "Using SMB to Connect".
• To register a folder in a NetWare server, see "Using NCP to Connect".

7. Registering Addresses and Users for Facsimile/Scanner Functions

266

7

Summary of Contents for LD425





































































































































































































































































































































Reviews:

No comments