Ricoh K-C3.5L Page 158 Service Training Download

Page: 158 / 193

Model K-C3.5L

158

Ricoh Co. Ltd.

http://www.ricoh.com/

Slide 158

Mechanical Components

Study the component layout diagrams in the
Two-Tray Paper Tray Unit (PS450) Service
Manual.

Mechanical component layout

Drive layout

Go to your machine and find the components in
the diagrams.

More on Mechanical Components

The feed roller is part of the tray.

When the user pulls out the tray, paper caught between the feed roller and
friction pad does not remain jammed inside the machine.

The drive layout diagram shows the motor and gears for driving the paper feed
roller.

A relay roller feeds paper up from the lower tray. This is operated by the relay
clutch.

Summary of Contents for K-C3.5L


































































































































































































Search results

Summary of Contents for K-C3.5L

Reviews:

Related manuals for K-C3.5L

Brands by name

Popular brands

Ricoh K-C3.5L, Service Training

Search results

Summary of Contents for K-C3.5L

Reviews:

Related manuals for K-C3.5L

Brands by name

Popular brands