manualshive.com logo in svg

Ricoh K-C3.5L, Service Training, Page: 62 / 193

Share
Download
Ricoh K-C3.5L Service Training Download Page 62

Model K-C3.5L

62

Ricoh Co. Ltd.

http://www.ricoh.com/

Slide 62

Toner Supply - Input to Development Unit

‰

Mylar tabs in bottle 
unit push toner 
towards development 
unit entrance.

‰

Recycled toner from 
drum also arrives at 
this entrance.

Recycled toner enters here

New toner enters here

More on Toner Supply Input to the Development Unit

‰

Toner enters the development unit through the shutter.

¾

This shutter is opened when a bottle is put in the machine, as explained 
earlier.

‰

Note where the new toner enters the development unit.

¾

Recycled toner also enters through the same opening. The toner collection 
coil for recycled toner can be seen at the top right side of the drawing on 
the right hand side of the slide.

‰

Toner recycling is covered in the next section of the course.

Summary of Contents for K-C3.5L


































































































































































































Reviews:

No comments