Ricoh K-C3.5L Page 42 Service Training Download

Page: 42 / 193

Model K-C3.5L

Ricoh Co. Ltd.

http://www.ricoh.com/

Slide 42

Lab Work

Before you start

Go to the machine. Look for the front and right cover switches.
See how the covers operate the switches.

On the point-to-point diagram, look at the circuit from the power
supply through to the laser diode.

Practice the following

Laser unit component replacement procedures.

» FSM

Replacement and Adjustment

Laser Unit

Copy adjustments:

» FSM

Replacement and Adjustment

Copy Adjustments Printing/Scanning

Printing

Do any procedures you think should be practiced.

IMPORTANT: Read the safety notice in the service manual, and
examine the warning labels. Pay attention to all notes, cautions,
and warnings in the manual.

No additional notes.

Summary of Contents for K-C3.5L


































































































































































































Search results

Summary of Contents for K-C3.5L

Reviews:

Related manuals for K-C3.5L

Brands by name

Popular brands

Ricoh K-C3.5L, Service Training

Search results

Summary of Contents for K-C3.5L

Reviews:

Related manuals for K-C3.5L

Brands by name

Popular brands