manualshive.com logo in svg

Ricoh K-C3.5L, Service Training

Share
Download
Ricoh K-C3.5L Service Training Download Page 76

Model K-C3.5L

76

Ricoh Co. Ltd.

http://www.ricoh.com/

Slide 76

Toner Recycling

‰

Toner collection coil: 
Moves toner towards 
the opening in the 
PCU (Photo 
Conductor Unit)

Drum

Toner collection coil

Toner collection coil

Mixing augur 1

Opening

Opening

More on Toner Recycling

‰

The slider with the two comb-like appendages on it is always vibrating. 

¾

The comb-like appendages break up any blockages of toner.

‰

Note the two slots in the development unit. 

¾

The one on the left receives fresh toner from the cartridge. 

¾

The one on the right receives the recycled toner. 

¾

New and recycled toner are mixed together in the development unit.

‰

Mixing auger 1 in the development unit mixes the recycled toner with fresh toner 
from the bottle.

‰

Toner adhering to the transfer roller is sent back to the drum, as we shall see in 
the Transfer section of the course. This toner is in turn recycled to the 
development unit. It may contain some small amounts of paper dust.

Summary of Contents for K-C3.5L


































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands