manualshive.com logo in svg

Ricoh K-C3.5L, Service Training, Page: 85 / 193

Share
Download
Ricoh K-C3.5L Service Training Download Page 85

Model K-C3.5L

85

Ricoh Co. Ltd.

http://www.ricoh.com/

Slide 85

Overview

‰

Built-in paper trays: 250 sheets each

Š

Friction pad and feed roller system

‰

By-pass tray: Up to 100 sheets

More on Overview

‰

Note that the paper feed roller and shaft come out with the tray when the user 
pulls the tray out. This prevents paper from getting caught inside the machine 
when the tray is pulled out.

‰

Note the functions of the two relay sensors.

‰

The by-pass tray is not shown on the diagram.

‰

The by-pass tray can handle thick paper (this mode is also for OHPs) and 
‘special’ paper (meaning envelopes, traditional Japanese paper, etc.).

¾

The machine does not change the fusing, transfer, or other parameters if 
the user selects ‘special paper’. 

Choose “Special Paper” from the driver when printing from a tray that is 
set up for ‘special paper’. Otherwise, the job will not print.

Trays set up for ‘special paper’ will be skipped for Auto Continue

Summary of Contents for K-C3.5L


































































































































































































Reviews:

No comments