Ricoh IM C530 Series, User Manual

Page: 231 / 288

Message Cause Solution and reference
"There is no response
from the scanner. There
may be a number of
reasons for this, e.g. the
data between the
computer and scanner
has been lost because of
an increase in network
traffic, the firewall in the
virus protection software
may be activated, or
there might be problems
with the hardware etc. If
you can not fix this
problem, please call
service." The network is busy. Wait a while.
The firewall function is
enabled on the
computer. Configure the firewall function of the computer
to allow communication of the application
used, or disable the firewall function.
The machine or the
computer is not
connected to the
network correctly. Check that the machine or the computer is
connected to the network correctly.
"User Authentication in
SNMPv3 connection has
failed." The authentication
information is registered
incorrectly in Network
Connection Tool when
SNMPv3 encrypted
communication is
enabled on the
machine. Register the SNMPv3 authentication
information in Network Connection Tool that is
installed on the computer with the TWAIN
driver. For the SNMPv3 authentication
information, consult your network
administrator.
See "Installing the TWAIN/WIA Driver", User
Guide (Full Version).
When a Message Appears While Using the Scanner Function
229