Ricoh GX200 User Manual Download Page 160

Page: 160 / 266

158

r P
lay
b

ack

You can protect files from being accidentally deleted.

Caution------------------------------------------------------------------------------------------

Protected files cannot be deleted normally. However, they will be deleted if you format
the memory where the files are stored.

Press the

(Playback) button.

• The last file recorded is displayed.

Press the

!"#$

buttons to display the file you want to

protect.

Press the MENU/OK button.

• The playback menu appears.

Press the

button to select

[Protect] and press the

button.

Make sure that [1 File] is
selected, and then press the
MENU/OK button.

• The selected file is protected and the

symbol appears on the screen.

Preventing the Deletion of Files

(Protect)

Protecting a File

Finish

All Files

1 File

Select

12:00

2008/07/01

Summary of Contents for GX200











































































































































































































































































Search results

Summary of Contents for GX200

Reviews:

Related manuals for GX200

Brands by name

Popular brands

Ricoh GX200, User Manual

Search results

Summary of Contents for GX200

Reviews:

Related manuals for GX200

Brands by name

Popular brands