Ricoh GX200 User Manual Download Page 100

Page: 100 / 266

rio

hoo

ting
Fu
nc
tion
s

Turn the mode dial to SCENE.

• The camera is ready to shoot and the selected scene mode is

displayed at the top of the picture display.

Press the MENU/OK button.

• The scene mode selection screen appears.

Press the

!"#$

buttons to select [Zoom Macro].

Press the MENU/OK button.

Press the

(Telephoto) button or

(Wide-angle)

button.

• The magnification appears on the picture display.

Compose your picture and half-press the shutter
release button.

Full-press the shutter release button.

Note ----------------------------------------------------------------------------------------------

•

You can shoot close-ups using the zoom macro within the following distances.

•

If [Pic Quality/Size] is set to 4000

3000, you can also set [Digital Zoom Img] to [Auto

Resize] and auto resize zoom is activated. (

P.204)

Shooting in Zoom Macro Mode

Approx. 1 cm
(from the front of the lens)

Shooting range: Approx. 17 mm

13 mm

(when digital zoom is not used)
Shooting range: Approx. 4.2 mm

3.2 mm

(when 4.0

digital zoom is used)

Summary of Contents for GX200











































































































































































































































































Search results

Summary of Contents for GX200

Reviews:

Related manuals for GX200

Brands by name

Popular brands

Ricoh GX200, User Manual

Search results

Summary of Contents for GX200

Reviews:

Related manuals for GX200

Brands by name

Popular brands