Ricoh GX200 User Manual Download Page 191

Page: 191 / 266

189

ng C

Se
tti

When using the optional wide conversion lens (DW-6) or tele
conversion lens (TC-1), it is necessary to set which lens will be
used.

Display the setup menu.

• For the operating procedure, see P.184.

Press the

button to select [Conversion Lens] and

press the

button.

Press the

buttons to select

the desired setting.

Setting the Type of Conversion Lens

(Conversion Lens)

Available Settings

Description

Off

Even when a conversion lens is attached to the camera, the camera
will not be recognize it as an attached conversion lens.

WIDE [DW-6]

When a conversion lens is attached to the camera, it will be
recognized as a wide conversion lens (DW-6).

TELE [TC-1]

When a conversion lens is attached to the camera, it will be

recognized as a tele conversion lens (TC-1).

Start Sel.

*Default setting

The conversion lens type selection screen always appears at the

following times. This is useful when frequently using both the DW-6
and TC-1 lenses.

•

When the camera is turned on with a conversion lens attached

•

When the conversion lens is attached to the camera

Summary of Contents for GX200











































































































































































































































































Search results

Summary of Contents for GX200

Reviews:

Related manuals for GX200

Brands by name

Popular brands

Ricoh GX200, User Manual

Search results

Summary of Contents for GX200

Reviews:

Related manuals for GX200

Brands by name

Popular brands