Ricoh GX200 User Manual Download Page 122

Page: 122 / 266

120

rio

hoo

ting
Fu
nc
tion
s

Displaying the shooting menu.

• For the operating procedure, see P.103.

Press the

button to select [Image Settings] and press

the

button.

Press the

buttons to select

[B&W (TE)] and press the

button.

• The [Image Settings] screen appears.

Press the

buttons to

select [Toning Effect] and
press the

button.

Press the

buttons to

select from [Sepia], [Red],
[Green], [Blue], or [Purple],
and press the MENU/OK
button or the

button.

Press the

buttons to select [Contrast] and

[Sharpness], and press the

buttons to adjust the

settings.

Press the MENU/OK button.

• The [B&W (TE)] setting is saved, and the display returns to the

shooting menu.

Setting the Toning Effect for Black-and White

Images (B&W (TE))

Cancel

Summary of Contents for GX200











































































































































































































































































Search results

Summary of Contents for GX200

Reviews:

Related manuals for GX200

Brands by name

Popular brands

Ricoh GX200, User Manual

Search results

Summary of Contents for GX200

Reviews:

Related manuals for GX200

Brands by name

Popular brands