Ricoh GX200 User Manual Download Page 199

Page: 199 / 266

197

ng C

Se
tti

You can set whether the functions assigned to the Fn1/Fn2 buttons
with [Set Fn1/2 Button] (

P.77) are saved with [Reg. My Settings]

(

P.191).

Display the setup menu.

• For the operating procedure, see P.184.

Press the

button to select [Fn Set. My Set.] and press

the

button.

Press the

buttons to select

the desired setting.

Press the MENU/OK button.

Setting Whether to Save the Fn

(Function) Button Function to My

Settings (Fn Set. My Set.)

Available Settings

Description

Save functions registered to the Fn1/Fn2 button with [Reg.
My Settings].

Off *Default setting

Functions registered to the Fn1/Fn2 button with [Reg. My
Settings] will not be saved.

Summary of Contents for GX200











































































































































































































































































Search results

Summary of Contents for GX200

Reviews:

Related manuals for GX200

Brands by name

Popular brands

Ricoh GX200, User Manual

Search results

Summary of Contents for GX200

Reviews:

Related manuals for GX200

Brands by name

Popular brands