Ricoh GX200 User Manual Download Page 172

Page: 172 / 266

170

r P
lay
b

ack

Press the

buttons to select

[Auto] and press the

button.

• The [Level Compensation] screen

appears. The original image appears
at the upper left of the screen and the
corrected image is shown on the right.

• If you select a file that cannot use

level compensation, an error
message appears and you are
returned to the playback menu.

• To cancel level compensation, press

the DISP. button.

Press the MENU/OK button.

• Messages appear during the correction process, and then the

corrected image is recorded. The original image remains unchanged.

Correcting Images Automatically (Auto)

Level Compensation

Cancel

Auto

Summary of Contents for GX200











































































































































































































































































Search results

Summary of Contents for GX200

Reviews:

Related manuals for GX200

Brands by name

Popular brands

Ricoh GX200, User Manual

Search results

Summary of Contents for GX200

Reviews:

Related manuals for GX200

Brands by name

Popular brands