Ricoh Gestetner 5450, Service Manual, Page: 268 / 315

1 July, 1998 PRINTING SECTION
6-77
R
eplacem
ent
Ad
ju
st
me
n
t
Reinstallation procedure
CAUTION: Take care not to turn
the drive accidentally
after removing the
cylinder. When the
drive is in position, the
cutout (for
engagement) in the
drive conductor (white
disk) [A] is positioned
horizontally but leans
to the upper right just
slightly.
1. Hold the pressure cylinder so
that the round hole [C] is
uppermost. Rest the pressure
cylinder on the flat area of the
inner cover [D].
CAUTION: There is an
encoder plate [B] at
the rear of the
cylinder. Be careful
not to damage it
when installing the
cylinder.
2. With the left hand, hold the
bearing tightly, putting fingers
into the holes as shown.
3. Support the rear of the
pressure cylinder with the right
hand. Put the right hand into
the side trapezoid hole (for
removing lower wrapping jams),
and support the bottom of the
cylinder.
C229R005.WMF
C229R004.WMF
[A]
[D]
[C]
[B]