Ricoh Gestetner 5450, Service Manual, Page: 258 / 315

1 July, 1998 PAPER FEED SECTION
6-67
Replacement
Adjustment
6.9.9 REGISTRATION ROLLER LIFTING CAM POSITION
ADJUSTMENT
PURPOSE: To ensure smooth paper feed from the registration roller to the drum.
CAUTION: Make sure that the drum is at home position before the adjustment.
1. When installing the registration roller lifting cam [A] on the shaft, align the cam
follower (a bushing) at the center or within two divisions to the right of the
center.
2. If the cam follower cannot be put in the correct place, try to change the gear
meshing. Also, try to readjust the position by loosening the screw holding the
cam to the gear.
NOTE: To obtain a perfect adjustment, you must take out any gear play by
applying clockwise pressure to the cam (with the gear) during the
adjustment.
C229R039.WMF
[A]