Ricoh Gestetner 5450, Service Manual, Page: 267 / 315

PRINTING SECTION 1 July, 1998
6-76
10. Put the right hand into the
side trapezoid hole (for
removing lower wrapping
jams), and support the
bottom of the cylinder.
11. Pull it a little toward you
(to disengage the joint
behind the cylinder).
Then, push up to the
drum position.
CAUTION: There is the
encoder plate
at the rear of
the cylinder.
Be careful not
to damage it
when
removing the
cylinder.
12. Pull the cylinder toward
you, and rest put it on
the flat area of the inner
cover [A].
13. With the left hand, hold
the bearing tightly,
putting fingers into the
holes as shown.
14. Support the rear of the
pressure cylinder with
the right hand. Then,
bring out the cylinder
using both hands.
C229R003.WMF
C229R004.WMF
[A]