Ricoh Gestetner 5450, Service Manual, Page: 163 / 315

2. BASIC SETTINGS 1 July, 1998
4-26
8: 2-020-11 (Default On Line paper size)
This is the default paper size when the On Line key is pressed,
0: A3, 1: B4, 2: A4, 3: A4 lengthwise, 4: B5, 5: B5 lengthwise, 6: A5,
7: A5 lengthwise, 8: A6, 9: A6 lengthwise, 10 to 12: Not used, 13: Free, 14: Auto
Free – The master size is determined by the paper size sent from the PC.
Auto – The master size is determined by the paper size on the paper feed table. If
the data from the PC is for a larger paper size, the excess data is lost.
Other settings: For example, if the setting is 0 (A3), the machine always makes an
A3 master.
9: 2-020-12 to -15 (Default make-up patterns 1 to 4)
0 to 39: Preset patterns, from 1 to 40
40 to 43: User-created patterns A to D
10: 2-030 (Panel beeper)
0: Disabled, 1: Enabled (except for when keys pressed), 2: Enabled fully
11: 2-031 (Background correction)
This can be used in letter/photo, photo, and tint modes to prevent the background
of an original from appearing on copies. See Detailed Section Descriptions –
Image Processing for more details.
12: 2-032 (Thermal head energy control with temperature)
If this is switched on, the energy supplied to the thermal head will depend on the
temperature measured by the thermistor in the drum.
Less than 25
°
C 25 – 30
°
C More than 30
°
C
Standard SP 3-020-1 value
(Default: -7%)
SP 3-020-1 – 5%
(Default: -12%)
SP 3-020-1 – 10%
(Default: -17%)
Economy SP 3-020-2 value (Default: -25%)
13: 2-046-2 (ADF original size detection)
Disabling ADF original size detection allows the ADF to scan originals within the
following range.
Width: 105 to 297 mm
Length: 128 to 864 mm
14: 2-060 (Long paper mode)
This disables trailing edge detection to allow long printer paper to be fed. This is
not within specifications, so the machine’s performance cannot be guaranteed
using this mode.