Ricoh FACSIMILE FAX77, Field Service Manual

Page: 76 / 197

Bit Switch 6
BIT FUNCTION
DATA COMMENTS
0 Confidential trans- 0: Enabled Used in W. Germany only.
mission 1: Disabled
1 Transfer request
0: Enabled
Used in W. Germany only.
1: Disabled
2 Eight-minute close 0: Disabled
If this bit is at 1, the machine will cut the line after a transmis-
1: Enabled sion has lasted for 8 minutes. Used in W. Germany only.
3 Printout of image 0: Disabled
For the user’s reference, a sample of the message sent from
data sample on 1: Enabled memory is printed at the bottom of the memory transmission
memory tx reports report if the transmission fails. If this bit is 1, the sample will
even if transmis- also be printed if the transmission succeeds. This bit is ig-
sion was unsuc-
nored if bit 7 of bit switch 13 is 1.
cessful
4 Not used Do not change the factory setting.
5 Not used Do not change the factory setting.
6 Not used Do not change the factory setting.
7 Fallback on receiv- 0: No 1: Yes If this bit is 1, the machine’s tx modem rate will fall back
ing a negative before sending the next page if a negative code is received.
receipt signal This bit is ignored if ECM is being used.
2-45