Ricoh FACSIMILE FAX77, Field Service Manual

Page: 70 / 197

Bit Switch 2 - Continued
BIT FUNCTION DATA
COMMENTS
Coding type (tx mode)
5 Bit 6 Bit 5 Setting (0,0), (0,1) - The machine will send MR data. If the other end
0 0
MH and MR
cannot receive MR data, MH data will be sent.
6 0 1
MH and MR
(1,0) - The machine will send MH coded data only.
1 0 MH only
1 1 Not used
7 Recognition of 0: Unlimited length as- 0: The unit always assumes the other end has no rx paper
remote terminal’s sumed
length limit (paper roll), and ignores the paper length limit in
paper length
1: Limit specified by the the protocol from the other end.
other end is recognized 1: Use this setting if the unit often sends to machines that use
cut paper. For example, if the receiver specifies A4 paper in
the protocol but the local machine is sending a B4-length
page, the local machine will send MPS when it has sent an A4
length of data. The other end will feed another sheet of copy
paper and the local machine will send the remaining data.
2-39