Ricoh FACSIMILE FAX77, Field Service Manual

Page: 29 / 197

5. Fax Terminal’s Telephone Number - Function 80
This must be programmed for Transfer Request to work.
1. Make sure that the machine is in standby mode.
2. Press Function, enter 80, and press Yes.
3. Type in the fax terminal’s telephone number at the keypad in the following order.
i) International dial access code
ii) Country code
iii) Area code
iv) Press Pause/Redial
v) Telephone number
Press No if you made a mistake.
4. To store, press Yes, then Function.
6. Password - Function 84
In the FAX85, this password is used to print confidential messages.
1. Make sure that the machine is in standby mode.
2. Press Function, enter 84, and press Yes.
3. Press # immediately.
4. Enter the present password (for a new machine, type 0000).
Press No if you make a mistake.
5. Press Yes.
6. Enter the new password, then press Yes.
1-23