Technical Bulletin
No. RTB-001
SUBJECT: F-40 SERVICE MANUAL MODIFICATION
DATE: Dec.31 1990
PAGE: 3 of 10
Page: 04-05
Location: LANGUAGE CODE TABLE
Incorrect:
Nashua South Africa (A4)
SP-12
SP-13
Correct:
Nashua South America (A4)
SP-12 (Inch)
SP-13 (Metric)
Page: 04-05
Location: LANGUAGE CODE TABLE
Add "2: Spanish" to the list of languages in the SP-12 column.
Add "5: Spanish" and "5: Dutch" to the list of languages in the SP-13 column.
Note: This list is the same as that in row 2 (0.1.0.)
Page: 04-07
Location: Second DIP SWITCH (101) table from the top
Delete 2nd table with its above explanation. (* The factor setting of . . . )
Page: 04-11
Location: first paragraph
Correct this paragraph as follows:
If the finisher malfunctions, use Shift Tray Mode and Staple Mode to by-pass the
mainframe data. Then test operate the finisher to determine whether the cause of
the malfunction is in the finisher.
Page: 04-11
Location: step #1 of Shift Tray Mode
Incorrect: SW 101-1,2,and 4 to
Correct: SW 101-1 and 2 to
Page: 04-11
Location: step 3 of Shift Tray Mode
Incorrect: 3. Press SW 100 to start the finisher operation.
Correct: 3. Press SW 100 to put finisher off-line operation on standby.
Page: 04-11
Location: step 5 of Shift Tray Mode
Incorrect: 5. Press SW 101 to stop the finisher operation.
Correct: 5. Press SW 101 to end finisher off-line operation.
