Ricoh Container Stacker, Unpacking & Setup Instructions

Page: 7 / 49

1-2 Container Stacker Installation Instructions
Tools Required
The following tools are required:
Important Safety Instructions
Observe the following safety instructions for safe unpacking and installation.
1. Keep the work area clean and free of loose parts.
2.
Wear suitable clothing. Pay attention to ties, sleeves, and shirts so that they are
not caught in the equipment.
3.
Work in a stable position. Working in a strained position may cause injury.
4. If you must move the equipment, be sure the path is clear of obstacles and high
voltage areas or wires.
5. Unplug the equipment before cleaning. Unplug the Printer from the outlet before
cleaning the inside of the Printer and label the power cord plug to prevent other
persons from plugging it in while you are cleaning.
6.
Be sure to use the proper tools that are in good condition. Use of worn or
improper tools can cause injury.
TOOL APPLICATION
Cutter For unpacking
Phillips Screwdriver
No. 2 shaft length: approx. 100 mm
For installing the Printer and Containter Stacker
Adjustable open end wrench (Span; 30mm) For adjustment of leveling bolts
IC Gripper For replacement of nv-RAM
Level For installation of the Printer and Container
Stacker