Ricoh CL7000 - Aficio D Color Laser Printer, Setup Manual

Page: 89 / 106

Duplex Unit Type 7000
77
4
Installing the Duplex Reversal
Unit
AAAA
Using both hands, hold the du-
plex reversal unit level, and then
insert the hooks into the groove of
the stand. Align the hook tips
with the line on the stand, as
shown, and then insert slowly.
Do not let go of the duplex rever-
sal unit even after insertion.
The hooks of the duplex reversal
unit clip around the bar inside the
groove of the stand.
BBBB
While supporting the duplex re-
versal unit, remove the stopper
the printer's mounting bracket.
This stopper will be used in a later
step
E
, so take care not to lose it.
CCCC
While supporting the duplex re-
versal unit, remove the adhesive
tape, and then hold the auxiliary
bar in front of the hook on the left
side, and then stand it up.
DDDD
Hook the hole of the auxiliary bar
o nt o th e pr in ter 's mo u nti ng
bracket.
In step
E
, move the auxiliary bar to
the position with the perforated
line, as shown.
ZHXH250J
ZDJP046J
ZDJP047J
ZDJP048J