Ricoh Caplio RR-1, Operation Manuals, Page: 83 / 160

83
Shooting
2
5
Press the ENTER button again after setting
the digit for the seconds.
The interval timer is now enabled.
6
Press the shutter release button.
The camera will take the first shot and then proceed
to shoot at the preset interval.
The “INTERVAL MODE” message flashes on the
LCD monitor while interval shooting is in progress.
Shooting will continue until the internal memory or
SmartMedia memory card runs out of available
memory.
Note
• To cancel interval shooting, press the CANCEL button during
shooting (while [INTERVAL MODE] is flashing).
• You can take normal shots by pressing the shutter release button
while interval shooting is in progress. The preset interval will not be
affected.
• The actual interval between shots may be longer than the preset time
depending on the image quality and flash mode settings.
Auto Bracket Shooting
Auto bracket shooting allows you to take 3 frames
in succession at exposure compensation values of
–0.5 EV, 0 and +0.5 EV, based on the exposure
compensation value set in “Setting the Exposure
Compensation” (p.62).
To prevent camera shake, mount the camera on a
tripod or set it on a flat surface when taking the
pictures.
1
Set the mode dial to [ ] and press the
MENU button.
Note
• The interval shooting mode is
canceled when you press the
CANCEL button, when you
set the mode dial to another
mode, or when you turn the
camera off while the
“INTERVAL MODE” message
is lit on the LCD monitor.
28
INTERVAL MODE
START:RELEASE INTERVAL MODE
START:RELEASE
CANCEL:CANCEL CANCEL:CANCEL