139
Appendix
Wrong type of SmartMedia
memory card
SmartMedia memory card
incorrectly oriented
Battery is exhausted
Camera malfunction
Date and time setting is incorrect
Battery has been removed
Keep settings mode is disabled
Auto power off setting is disabled
Camera powered by AC adapter
Beep disabled
Obstruction between remote
control unit and camera sensor
Dirty remote control transmitter or
camera sensor
Remote control battery expired
TV system setting is incorrect
Incorrect video I/O switch setting
on video equipment
SmartMedia
memory card
will not fit into
slot
Use a SmartMedia memory card specified
for the camera
Insert the SmartMedia memory card the
correct way
Charge battery or use AC adapter (optional)
• Turn power off and on once. Set the
mode dial to
(Still Picture) or
(Text).
• Reset the camera.
If the problem persist, carry out the
following procedures.
1 Remove the battery, then reload the
battery.
2 Try operating the camera again.
Set the correct date and time
The date setting is reset if the battery has
been removed for about 1 month. Set the
date again.
Enable the keep settings mode
Enable setting
Auto power off is automatically disabled
when powered by an AC adapter
Set beep sound to [ON] in the SET menu.
Remove obstruction
*Sensor is on upper left of LCD monitor
Clean with soft dry cloth
Replace CR2032 lithium battery
Select correct TV system
Check video I/O switch setting on video
equipment
■
Miscellaneous
Camera will not
operate even
when buttons
and switches
are operated
Date and time
are wrong
Date and time
were set but
disappeared
Auto power off
will not activate
Symptom
Cause
Remedy
Page
P.27
P.27
P.21
P.30
P.31
P.140
P.37
P.37
P.120
P.123
–
P.124
–
–
–
P.126
–
No image on
TV screen
Mode settings
have changed
Beep will not
sound
Remote control
unit will not
work
Summary of Contents for Caplio RR-1
Page 112: ...112 ...
Page 118: ...118 ...
Page 151: ...151 Appendix ...
Page 157: ...157 Appendix ...