Ricoh B079, Service Manual

Page: 294 / 948

SERVICE PROGRAM MODE TABLES
B079/B082 5-68 SM
SP7 Mode Number Function and [Setting]
7801 ROM No./Firmware Version Displays the ROM number and firmware
version numbers.
7803* PM Counter Display Displays the PM counter since the last PM.
7804 PM Counter Reset
Resets the PM counter. To reset, press
!
.
7807 SC/Jam Counter Reset Resets the SC and jam counters. To reset,
press
!
.
This SP does not reset the jam history
counters: SP7-507, SP7-508.
7808 Counter Reset Resets all counters except SP7-003-***, SP7-
006-***. To reset, press
!
.
7810 Access Code Clear Use to clear the access code if the customer
forgets the code. After clearing the code is reset
for Null and the password entry display does
not open. To clear, press
!
.
7811 Original Count Clear Clears the original total display, displayed with
SP7-002-***. To clear, press
!
.
Print Counter Reset
1 Tray1
2 Tray2
3 Tray3
4 Tray4
5 LCT
7816
6 By-pass
Resets the total copy count by paper tray. To
reset, press
!
.
Use these SP modes when replacing the pick-
up, feed, and separation rollers.
7822 Copy Counter Reset Magnification Resets all counters of SP7-301 (Copy Count:
Magnification).
7825 Total Counter Reset No longer used. Executing this SP has no
effect.
This SP is no longer required because the
counter initialized (set to “0”) at the factory.
7826* MF Device Error Count This display is for the Japanese version only.
Japan Only
7827 MF Device Error Count Clear This SP is for the Japanese version only.
(Clears SP7-826.)
Japan Only
7832 Self-Diagnosis Result Display Execute to open the “Self-Diagnose Result
Display” to view details about errors. Use the
keys on in the display on the touch-panel to
scroll through all the information. If no errors
have occurred, you will see the “No Error”
notation.
Pixel Coverage Ratio This SP mode displays the coverage ratio of the
output (the ratio of the total pixel area of the
image data to the total printable area on the
paper). Note that this value is not directly
proportional to the amount of toner consumed,
although of course it is one factor that affects
this amount. The other major factors involved
include: the type, total image area and image
density of the original, toner concentration and
developer potential.
1 Last Pages 0% to 100%.
7833
2 Average Pages 0% to 100%.
⇒
Rev.08/2003