Ricoh B079, Service Manual

Page: 267 / 948

Service
Tables
SERVICE PROGRAM MODE TABLES
SM 5-41 B079/B082
SP5-xxx: Mode
SP5 Mode Number Function and [Setting]
5024* mm/inch Display Selection Selects the unit of measurement.
After selection, turn the main power switch off and
on.
0: Europe/Asia 1: North America
0: mm, 1: inch
5044 Operation Panel Bit SW DFU
5104* A3/DLT Double Count Specifies whether the counter is doubled for
A3/DLT.
0: No
1: Yes
2: Counts once for A4 SEF fed from bypass tray.
If
!
is selected, the total counter counts up twice
when A3 or DLT paper is used.
5106* 6* ADS Level Selection Selects the image density level used in ADS
mode.
[1~7 /
4 / 1 notch per step]
Example: If you set SP5-106-6 to “2”: Pressing the
Auto Image Density key toggles the display off
and manual notch 2 is selected.
Adjust this SP if the customer cannot attain clean
copies after performing automatic density
adjustment.
5112* Non-Standard Paper Selection Determines whether a non-standard paper size
can be initialized for copying or not.
0: No,
1: Yes
If
!
is selected, a non-standard size can be input
using the UP mode.
5113* Selects the corresponding key for installed
devices such as a coin lock.
Japan only
[0~5 / 0 / 1 step]
0 None.
1
Key card (RK3, RK4)
2 Key card (subtraction count setting)
3 Pre-paid card
4 Coin lock
5 MF key card (Peace) Japan only
11 MF key card (Increment)
Optional Counter Type
12 MF key card (Decrement)
5118* Disable Copying DFU
5120* Mode Clear Opt. Counter
Removal Clears all coin devices. Japan only
[0~2 / 0 / 1 step]
0: Normal reset.
1: Resets only when job finished or before job
begins.
2: Not normal reset.
5121* Counter Up Timing Determines whether the optional key counter
counts up at paper feed or at paper exit.
0: Feed , 1: Exit
The total counter is not affected by this SP mode.
⇒