Ricoh B079, Service Manual

Page: 933 / 948

BIT SWITCHES
SM 55 B547
Fa
x Option
B547
FAX Switch 0E SP No. 3-201-015
No FUNCTION COMMENTS
0 Not used Do not change the settings.
1 Scan resolution unit
0: mm
1: inches
This bit determines which resolution unit will be
used for scanning a fax message.
Default setting: mm
2-7 Not used Do not change the settings.
FAX Switch 10 ~ 1F - Not used (do not change the settings)
FAX Switch 0F SP No. 3-201-016
No FUNCTION COMMENTS
0 Image rotation before
transmission (A4/LT sideways)
0: Disabled
1: Enabled
This bit determines whether the machine rotates the
scanned image by 90 degrees before transmission.
If this bit is set at 1, A4 (LT) sideways images (297
mm width in the protocol) will be transmitted as A4
(LT) lengthwise images (216 mm width in the
protocol).
1 Not used Do not change the setting.
2 Image rotation before
transmission (A5/HLT
lengthwise)
0: Disabled
1: Enabled
This bit determines whether the machine rotates the
scanned image by 90 degrees before transmission.
If this bit is set at “1”, A5 (HLT) lengthwise images
will be transmitted as A4 (LT) width images (216
mm width in the protocol).
3-7 Not used Do not change the settings.
Rev. 09/2003
⇒
⇒