Ricoh AP204, Operator'S Manual

Page: 95 / 301

76
Troubleshooting
6
G
Insert the photoconductor unit so
that the protruding green axles on
both sides are aligned with the
tracks inside the green lock levers.
Lower it until the gears mesh se-
curely.
TPOH230E
Important
❐
When inserting the phot-
oconductor unit, be careful not
to damage the surface of it.
H
Return the green lock levers to
their original positions.
TPOH590E
Important
❐
Do not return lock levers with
force. If you cannot lock them
easily, pull the photoconductor
unit from the printer. Then rein-
sert it again until the gears mesh
securely. After that, try returning
the levers to their original posi-
tions.
E
Hold the inset grip of the photo-
conductor unit, pull it straight up,
and remove it from the printer.
TPOH570E
Important
❐
Exposing the photoconductor
unit to light for too long can re-
duce its performance. Clean the
charge wire as quickly as pos-
sible.
F
Use the wire brush to clean off the
charge wire. Insert the wire brush
between the case and guide (
1 1 1 1 1 ),
and then move it left and right ( 2 2 2 2 2 ).
TPOH710E