Ricoh AP204, Operator'S Manual

Page: 71 / 301

52
Paper and Other Media
5
Important
❐
Make sure that the stack of paper is
no higher than the top-most limit
mark (
T
) inside the tray.
❐
The front and side guides should be
set to the correct paper size to avoid
paper feed problems.
❐
Do not load different kinds of pa-
per in the tray at a time.
D
Slide the paper tray completely
into the printer.
Important
❐
Be sure to insert the paper tray
completely. Otherwise, paper
misfeeds might occur, or the
front cover might touch the pa-
per tray.
Specifying paper size using the
operation panel
Use the following procedure to specify
the paper size from the printer’s op-
eration panel after loading custom size
paper into the standard paper tray.
Note
❐
You can set the custom paper in the
standard tray (tray 1) only.
❐
To switch to the tray 1, => P54
“Switching between Paper Trays”.
❐
The custom paper size setting is
cleared when the printer is turned
off.
❐
After pressing a key, wait until the
display changes as described before
performing the next key operation.
A
Press
{ { { { {
Media
} } } } }
.
TPOS050E
Power On Line Data In
Reset
Escape Menu
Media Enter
Error
The “Media” menu appears.
<Media>
U
1.Paper Tray
T
B
Use
{U} {U} {U} {U} {U}
and
{T} {T} {T} {T} {T}
to display “2. Pa-
per Size,” and then press
{ { { { {
Enter
} } } } }
.
<Media>
U
2.Paper Size
T
The “Paper Size” menu appears.
<Paper Size>
U
*Auto Detect
T