Ricoh AP204, Operator'S Manual

Page: 45 / 301

Setting Up the Printer for Network with the Operation Panel
26
3
8 Check if the pointer (
U U
U U
U
) is at the rightmost digit, press
{ {
{ {
{
Enter
} }
} }
}
to register
the IP address you specified.
F
If you use TCP/IP, you should assign “33. Subnet Mask”, “34. Gateway Add”,
“35. Access CTL” and “36. Access Mask” using the same procedure for speci-
fying the IP address.
G
If you use TCP/IP, you should make settings for “37 Net Boot”. You can
select how to assign the printer’s address using the computer. Select one of
items on the table below.
Menu item on
Available method
the panel display
ARP+PING RARP+TFTP BOOTP DHCP
ARP+PING
✓
ARP & RARP
✓ ✓
ARP & BOOTP
✓ ✓
ARP & RARP & BOOT
✓ ✓ ✓
None (Default)
RARP+TFTP
✓
BOOTP
✓
RARP & BOOTP
✓ ✓
DHCP
✓
Note
❐
Select “None”, if you want to specify the address using the printer’s opera-
tion panel.
❐
You should set up your server, if you want to use “RARP+TFTP”, “BOOTP”,
or “DHCP”.
1
Press
{U} {T} {U} {T} {U} {T} {U} {T} {U} {T}
until the following message appears.
<System Menu>
U
37.Net Boot
T
2 Press
{ { { { {
Enter
} } } } }
.
The current setting appears on the panel display.
<Net Boot>
U
*ARP+PING
T
3 Press
{U} {T}
until the method you want to use appears.
4
Press
{ { { { {
Enter
} } } } }
.