Ricoh Aficio SP 5100N, Service Manual

Page: 121 / 175

EDC (Engine Diagnostic Control) Mode
SM 5-3 G186
Service
Ta
bles
Function
Function Name Description Display (LCD)
Top Cover
"Open" shows when cover is open.
"Closed" shows when cover is closed.
Top Cover
[Closed]/[Open]
Tray1 Cassette
"Open" shows when tray 1 is open.
"Closed" shows when tray 1 is closed.
Tray1 Cassette
[Closed]/[Open]
Tray2 Cassette
"Open" shows when tray 2 is open.
"Closed" shows when tray 2 is closed.
Tray2 Cassette
[Closed]/[Open]
Tray3 Cassette
"Open" shows when tray 3 is open.
"Closed" shows when tray 3 is closed.
Tray3 Cassette
[Closed]/[Open]
Tray4 Cassette
"Open" shows when tray 4 is open.
"Closed" shows when tray 4 is closed.
Tray4 Cassette
[Closed]/[Open]
Fuser Door
"Open" shows when fuser door is open.
"Closed" shows when fuser door is closed.
Fuser Door
[Closed]/[Open]
ƒ The procedure and content above may vary, depending on the situation.
5.2.4 SENSOR STATUS
These Functions are to check a current state (normal or not) of each Sensor.
Usage
1. Press the arrow keys "
'
/
(
" until "Component Test / 1.Sensor Status" message is
displayed on the panel.
2. Press the "OK" key.
3. Press the arrow keys to find a desired function. (Refer to the table below)
4. Press the "OK" key.
5. Touch a sensor you would like to test.
6. Check the message on the LCD.
Function